Siemens Gigaset DX800A all in one Setup & User Manual page 63

Synchronisation will usually occur once a day (at night) if synchronisation is acti-
vated. Any additional synchronisation will take place only after each system start of
the base (e.g., after a firmware update or a power cut).
If you register a new handset on your base, it will assume the time and date of the
base without any additional synchronisation with the time server.
Date and time settings are transferred to every registered handset after synchroni-
sation.
Please note
u
The default time server "europe.pool.ntp.org" will remain stored on the base
even if you overwrite it. If you delete your time server from the Time Server
field and synchronisation is still activated, the base will continue to synchro-
nise with the default time server. However, it will no longer appear in
the Time Server field.
u
If you have entered your own time server in the Time Server field, and the
base is unable to synchronise for ten consecutive attempts, the base will syn-
chronise with the default time server on the next synchronisation.
u
If you have deactivated synchronisation with a time server and the time and
date are neither set on the base nor on a handset, then the base will attempt
to assume the date and time from the ISDN network during the next outgo-
ing call.
60