Assigning Receive/Send Connections To Bases/Handsets; Changing Internal Names; Number Assignment - Siemens Gigaset DX800A all in one Setup & User Manual

Assigning receive/send connections to bases/handsets,

changing internal names

You can assign as many of your connections as you wish to the base and all regis-
tered handsets. Receive connections determine which handset(s) will ring when a
call is received.
You can assign one of your connections as a send connection to the base and each
handset. The send connection specifies which phone number/VoIP account is
charged for calls from the base or handset. Exceptions: A dialling rule has been
defined for the dialled phone number
You can also choose to select the send connection from the list of all available con-
nections for each call made from the base/handset.
¤
Open the Settings
The following is displayed for the Desktop Phone and every handset (example):
¤
The default name (INT 1, ... INT 7), any name you have set, and a list of connec-
tions that are configured and active for the phone are displayed for each hand-
set and the base. The connection names are shown in the Connection column.
The value GSM is displayed for the GSM connection. The GSM connection is only
displayed if the list of known devices contains at least one GSM mobile phone.
Change the internal name of the device in the Name field, if required.
36
¢
(
¢ ¢
Telephony Number Assignment Web page.
page 44).