Logging Off - Siemens Gigaset DX800A all in one Setup & User Manual

Please note
u
If the system PIN is still set as 0000 on the base (default setting), you will be
notified during login that the unit is not secure and you should change the
PIN. You can deactivate this security notice for subsequent logins by select-
ing the option "Don't show this security advice again.". Click on OK to close
the dialog box.
u
If you do not make any entries for a lengthy period (approx. 10 minutes), you
are automatically logged off. The next time you try to make an entry or open
a Web page, the Login Web page is displayed. Re-enter the system PIN to log
back in again.
u
Any entries that you did not save on the phone before automatic log-off will
be lost.

Logging off

In the menu bar
figurator, you will see the Log Off command. Click Log Off to log off from the Web
configurator.
Warning
Always use the Log Off command to end the connection to the Web configura-
tor. If, for example, you close the Web browser without logging off beforehand,
it is possible that access to the Web configurator is blocked for a few minutes.
¢
( page 10) at the top right of every Web page in the Web con-
9