Using The Buttons - Siemens Gigaset DX800A all in one Setup & User Manual

Entering Cyrillic and Turkish characters
In the following section, the specified maximum number of characters permitted in
a field refers to Latin characters and digits (1 character = 1 byte), i.e., 1 character
means 1 byte.
Cyrillic and Turkish characters require 2 bytes each, e.g., with a field length of
16 characters, you can enter a maximum of 8 Cyrillic or Turkish characters.
If you enter too many characters into a field, the entry is rejected (not saved in the
base). The "old" field content (or the default settings) are retained and displayed
again when the Web page is updated. No warning/confirmation is given.
Applying changes
As soon as you have made your change on a page, activate the new setting on the
phone by selecting Set.
If your entry does not comply with the rules for this field, an appropriate error mes-
sage is displayed. You can then repeat the input.
Warning
Changes that have not been saved on your phone are lost if you move to
another Web page or the connection to the Web configurator is lost e.g., due to
exceeding the time limit

Using the buttons

Buttons are displayed in the bottom section of the working area. The following but-
tons are displayed depending on the function selected:
Edit
Display connection data/MSNs in the Web browser so that they can be edited.
Browse
Select a file on the PC whose Web browser is linked to the Web configurator.
Update Firmware
Start a firmware update.
Delete
Delete a file/directory.
OK
Perform an operation (e.g., log in to the Web configurator, delete connection).
Cancel
Reject changes made on the Web page and reload the settings that are currently
saved in your phone to the Web page.
Restore
Load phone data (device settings) stored on the PC back on to the phone.
Set
Store changes made on a Web page on the phone.
Save
Save data that determines the settings/configuration of the base or a phone
entry in a file on the PC.
12
¢
( page 9).