Placing Calls - Polycom 6000 Owner's Manual

10.
Press
Ending Active Calls
To end a call:
Press
You cannot end a call that is on hold until you resume the call. To
end a call on hold, press the Resume soft key, and then end the
call.
Note

Placing Calls

You can place a call off-hook with a dial tone),or on-hook (without
a dial tone). The phone displays the duration of active calls on the
phone screen.The following figure shows an active call to Jane
Smith at directory number 1951 that has lasted for nine seconds.
To place a call off-hook
1.
To obtain a dial tone, press
2.
Enter the phone number of the party you want to call.
3.
Press the Send soft key.
4.
To place a call on-hook (to dial a phone number):
5.
Enter the phone number of the party you want to call,
6.
Press the Dial soft key.
Instead of entering a phone number from memory, you can ac-
cess call lists, directories and speed dial lists to display and dial
the number for you.
• To access a call list, press the Menu key and then select Fea-
tures > Call Lists > Missed Calls, Received Calls, or Placed
Note
Calls. Scroll to the call you want to dial and then press the Dial
soft key.
to return to the idle screen.
or the End Call soft key.
25
or the New Call soft key.