Installing Your Polycom Conference Phone; Installing Your Conference Phone - Polycom 6000 Owner's Manual

3

Installing your Polycom Conference Phone

Installing your Conference Phone

The Conference Phone can be installed in one of 2 ways:
• You may connect Conference Phones to your existing router
or data wall jack
• You may connect Conference Phones Wirelessly to the op-
tional Wireless Transmitter.
Option 1: Connect the Conference Phone to your data
network
1. Connect one end of the 25 foot Network Cable to the
LAN jack on the phone.
2. Connect the other end of the 25 foot Network Cable to
the Power Insertion Cable.
3. Connect the Power Insertion Cable to an available LAN
port on the wall or router/switch device port.
4. Connect the Power Adapter to the Power InsertionCable.
5. Connect the Power Adapter (with the attached Regional
Power Cord) to the wall outlet.
14