Polycom 6000 Owner's Manual page 16

To connect the phone using the Wireless Adapter
1. Connect one end of the 25 foot Network Cable to the LAN
jack on the phone.
2. Connect the other end of the 25 foot Network Cable to the
Power Insertion Cable.
3. Connect the Power Insertion Cable to the LAN port on the
Wireless Adapter.
4. Connect the Power Adapter to the Power Insertion Cable.
5. Connect the Power Adapter (with the attached Regional
Power Cord) to the wall outlet.
6. Plug the Wireless Adapter's power adapter into the wall
outlet.
To avoid interference or static on the phone, place the Wireless
Adapter away from the phone as shown.
Note
16