Resetting The Ovp Circuit - Xantrex XFR 7.5-140 Operating Manual

Local Operation
Using Over Voltage Protection (OVP)
Resetting the To reset the OVP circuit after it activates:
OVP Circuit
1. Reduce the power supply's output voltage setting to below the OVP set point.
2. Press the STANDBY switch IN. The red S/D LED on the front panel turns on.
The OVP LED turns off.
3. Press the STANDBY switch again to return power to the load and resume
normal operation.
OR
1. Reduce the power supply's output voltage setting to below the OVP set point.
2. Turn the power supply OFF using the AC power switch, wait until the front
panel displays go out, then turn the power supply back ON again.
62
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Operating Manual for XFR 1.2kW Series Power Supply