Xantrex XFR 7.5-140 Operating Manual page 79

Remote Operation
Remote Analog Programming of Output Voltage and Current Limit
Table 4.2 Power Supply Settings for Different Programming Sources
Output Output Current Limit Programming Source
Voltage
0-5 Vdc
Programming
Source
0-5 Vdc SW1:
set 3 and 4
open.
J2: jumper 1 to
3 and 2 to 3.
0-10 Vdc SW1:
set 4 open.
J2: jumper 1 to
3 and 2 to 3.
0-5 k Resistor SW1:
set 1 closed,
3 and 4 open.
J2: jumper 1 to
3 and 2 to 3.
0-10 k SW1:
Resistor set 1 closed,
4 open.
J2: jumper 1 to
3 and 2 to 3.
None (Front SW1:
Panel set 4 open.
Control) J2: jumper 2 to
3.
76
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
0-10 Vdc 0-5 k Resistor
SW1: SW1:
set 3 open. set 2 closed, 3
J2: jumper 1 to and 4 open.
3 and 2 to 3. J2: jumper 1 to
3 and 2 to 3.
SW1: SW1:
default settings. set 2 closed,
J2: jumper 1 to 4 open.
3 and 2 to 3. J2: jumper 1 to
3 and 2 to 3.
SW1: SW1:
set 1 closed, set 1 and 2
3 open. closed, 3 and 4
J2: jumper 1 to open.
3 and 2 to 3. J2: jumper 1 to
3 and 2 to 3.
SW1: SW1:
set 1 closed. set 1 and
J2: jumper 1 to 2 closed,
3 and 2 to 3. 4 open.
J2: jumper 1 to
3 and 2 to 3.
SW1: SW1:
default settings. set 2 closed,
J2: jumper 2 to 4 open.
3. J2: jumper 2 to
3.
Operating Manual for XFR 1.2kW Series Power Supply
0-10 k Resistor None (Front
Panel Control)
SW1: SW1:
set 2 closed, 3 set 3 open.
open. J2: jumper 1 to
J2: jumper 1 to 3.
3 and 2 to 3.
SW1: SW1:
set 2 closed. default settings.
J2: jumper 1 to J2: jumper 1 to
3 and 2 to 3. 3.
SW1: SW1:
set 1 and 2 set 3 open,
closed, 1 closed.
3 open. J2: jumper 1 to
J2: jumper 1 to 3.
3 and 2 to 3.
SW1: SW1:
set 1 and set 1 closed.
2 closed. J2: jumper 1 to
J2: jumper 1 to 3.
3 and 2 to 3.
SW1: SW1:
set 2 closed. default settings.
J2: jumper 2 to J2: no jumper
3.