From Menu 3 - Ethernet Setup, enter option [4. Bridge Setup] and Menu 3.5 - Bridge Ethernet
Setup displays as shown in Figure 8-1.
Press Space Bar to Toggle.
Table 8-2 describes how to configure the [Handle IPX] field in Menu 3.5.
Table 8-2.
Bridge Ethernet Setup Menu - Handle IPX Field Configuration
Handle IPX Field
(Menu 3.5)
None
Client
Server
Client + Dial-On-
Broadcast in Menu 12 set
to [Yes]
Menu 3.5 - Bridge Ethernet Setup
Handle IPX= None
Press ENTER to CONFIRM or ESC to CANCEL:
Figure 8-1.
Menu 3.5 - Bridge Ethernet Setup
Description
When there is no IPX traffic on the LAN or when you do not want to apply any
special handling for IPX.
When there are only client workstations on the LAN
When there are only IPX servers on the LAN.
When there are both clients and servers on the LAN, and the local clients will
access the remote servers, set to Client and the Menu 12 to [Yes] to allow the
client queries to trigger the call. If they do not, set it to [Server].
Chapter 8 Bridge Configuration for LAN-to-LAN
Prestige 153/153X WAN Bridge/Routers
8-3