Configuring A Filter Set; Menu 21 - Filter Set Configuration; Figure - ZyXEL Communications Prestige 153 User Manual

9.1

Configuring a Filter Set

In order to distinguish between the 12 filter sets, each filter set should have a name or some sort
of Comments. You can edit these Comments in the following way:
From the Main Menu, select option [21. Filter Set Configuration].
Step 1.
Step 2. When Menu 21 - Filter Set Configuration appears, you can choose among 12 filter sets.
Select the filter set you wish to configure (no. 1-12), then press [Enter]
Step 3. This will bring you to the Edit Comments field. Whatever the comments are for that
filter set will be displayed in this field. You can edit the comments you wish to use to
identify that filter set.
Once you have completed filling in Edit Comments field, press [Enter] at the message: [Press
ENTER to confirm], or press [Esc] at any time to cancel your selections.
The new information will now be displayed in the read-only section of Menu 21 - Filter Set
Configuration as shown in Figure 9-2.
Filter
Set #
------
1
2
3
4
5
6

Menu 21 - Filter Set Configuration

Comments
------------------
______________
______________
______________
______________
______________
______________
Enter Filter Set Number to Configure=
Edit Comments=
Press ENTER to CONFIRM or ESC to CANCEL:

Figure 9-2.

Menu 21 - Filter Set Configuration
Prestige 153/153X WAN Bridge/Routers
Filter
Set # Comments
------ ------------------
7 ______________
8 ______________
9 ______________
10 ______________
11 ______________
12 ______________
Chapter 9 Filter Configuration
.
9-3