Table 7-1. Novell Ipx Ethernet Setup Fields - ZyXEL Communications Prestige 153 User Manual

The following Table 7-1 describes the Novell IPX Ethernet Setup Menu.
Table 7-1. Novell IPX Ethernet Setup Fields
Field Description
Seed Router Determine if your Prestige is to act as a seed router. This value
depends on the existing network. If there is a NetWare server providing
the network number, select No. If there is no NetWare server providing
the network number, select Yes.
Frame Type For every frame type that your Prestige needs to support, you need to
set the corresponding field to Yes. The frame type(s) selected here
must be the same frame type(s) as the server or client stations on that
network. Otherwise, the devices will not be able to communicate. You
can select one or more options listed in this field.
IPX Network If you selected your Prestige to act as a seed router, you need to
# provide a unique network number to be associated with the network
that your Prestige has joined. Keep in mind that this number must not
be used anywhere else on the entire internetwork.
Press [Enter] at the message [Press ENTER to Confirm ...] to save your selections, or press [Esc] at any
time to cancel your selections.
Chapter 7 Novell IPX Configuration for LAN-to-LAN
Prestige 153/153X WAN Bridge/Routers
Options
[Yes/No]
[802.2]
[802.3]
[Ethernet II]
[SNAP]
7-5