Prestige 153/153X WAN Bridge/Routers
Chapter 6
TCP/IP Configuration for LAN-to-LAN
This chapter shows you how to configure your Prestige for TCP/IP. Depending on your particular
applications, you will need to configure different menus. For instance, Internet access is the most
common application of TCP/IP. For this application, you should configure Menu 4. We will
illustrate the configuration for LAN-to-LAN applications in the following sections.
6.1
LAN-to-LAN Application
A typical LAN-to-LAN application is to use your Prestige to call from a branch office to the
headquarters, as depicted in the following Figure 6-1.
Coporate LAN
Branch Office LAN
Prestige 153/153X
Prestige 153/153X
Figure 6-1.
LAN-to-LAN Application with TCP/IP
For the branch office, you need to configure a Remote Node in order to dial out to the
headquarters. Additionally, you may also need to configure Static Routes if some services reside
beyond the immediate remote LAN.
Chapter 6 TCP/IP Configuration for LAN-to-LAN
6-1