Figure 7-5. Netware Servers Or Both Sides Of The Link - ZyXEL Communications Prestige 153 User Manual

7.5.2 Static Route Setup
If your LAN-to-LAN application has NetWare servers on both sides of the link, then all NetWare
client stations will have access to a server on their LAN as shown in Figure 7-5.
NetWare
Clients
Figure 7-5.
This may present a problem if you desire your client station to access a server at a remote site. For
example, in the diagram of Figure 7-5, suppose that a client station on the network on the left
wishes to access the NetWare server on the right (internal network number = 111). However, the
SAP broadcasts will receive a response from the server on the left (internal network number =
444). A static route is used to resolve this problem by providing your Prestige with some static
routing information to access the remote server.
From Menu 12, select one of the four possible IPX Static Routes (no. 11-14), this will open Menu
12.2 - Edit IPX Static Route, as shown in Figure 7-6.
External Network
Number = 333
Prestige 153/153X
Not Seed Routers
Netware Servers or Both Sides of the Link
Chapter 7 Novell IPX Configuration for LAN-to-LAN
Prestige 153/153X WAN Bridge/Routers
External Network
Number = 222
Prestige 153/153X
Server
Name =
Server_1
Internal Network
Number = 111
7-9