Command Interpreter Mode; Figure 13-12. Menu 24.7.2 - System Maintenance - Upload Rom File - ZyXEL Communications Prestige 153 User Manual

Prestige 153/153X WAN Bridge/Routers
13.7.2 Load ROM File
Type [atur3] and wait until your Prestige responds with an [OK] to begin uploading the new
ROM File, as shown in Figure 13-12. ROM File includes Prestige configuration, system-related
data, error and trace log. After uploading the new ROM File, you will lose all data. You need to
set the SMT baud rate to the default: 9600. You also need to reconfigure your Prestige.

Figure 13-12. Menu 24.7.2 - System Maintenance - Upload ROM File

13.8

Command Interpreter Mode

This option allows the user to enter the command interpreter mode. This mode allows you to
diagnose, test, and configure your Prestige using a specified set of commands. A list of valid
commands can be found by typing [help] at the command prompt. For more detailed information,
check the ZyXEL Web site or send an e-mail to the ZyXEL Support Group.
13-14 Chapter 13 System Maintenance
Menu 24.7.2 -- System Maintenance - Upload ROM File
To load the ROM file, type "atur3" while in debug mode and wait for
"Starting XMODEM upload" before beginning to upload file. Type
"atgo" after file has successfully loaded to start RAS. Then change
the baud rate to 9600.
Proceeding with the upload will erase the current ROM file.
Do You Which To Proceed:(Y/N)