Table 2-5. Prestige 153 Async Wan Port Setup Menu Fields - ZyXEL Communications Prestige 153 User Manual

Table 2-5 describes how to configure the WAN ports 1,2, and 3 with the Modem or ISDN TA
parameters.
Table 2-5. Prestige 153 Async WAN Port Setup Menu Fields
Field Description
Modem Name Enter a descriptive name for the Modem or ISDN TA connected to this
WAN Port.
Active Set to [Yes] to activate a WAN port, then your Prestige will initialize the
WAN Port and the attached Modem or ISDN TA. When a WAN Port is
deactivated, it has no effect on the operation of your Prestige, even
though its profile is still kept in the database, and can be activated in the
future.
Connection Select the connection type for your particular application. Select [Switch]
Type for Dial-up application or [Leased] for Leased Line Modem application.
Phone Enter the telephone number assigned to your modem line by your
Number telephone company. Note that your Prestige only accepts digits; do not
include dashes and spaces in this field.
Device Type Use the space bar to select one of the following devices: Modem / ISDN
TA / X.25 PAD / 56K Modem. A Device Type is selected for the WAN Port
such that a Remote Node only picks up a free device of the selected type
to dial out. Only the WAN Ports of the same device type can be bundled.
This field is not applicable if the Connection Type is set to [Leased].
Use the space bar to select the maximum speed of your Modem or ISDN
Port Speed
TA.
Available speeds are:
9600 / 19200 / 38400 / 57600 / 115200 / 230000 bps
Chapter 2 Hardware Installation & Initial Setup
Prestige 153/153X WAN Bridge/Routers
Example
ZyXEL
Press space-bar
to toggle
[Yes/No]
Press space-bar
to toggle
[Switch/Leased]
5551212
(example)
Space-bar to
toggle
[Modem]
[ISDN TA]
[X.25 PAD]
[56K Modem]
115200
(default)
2-17