SHUT DOWN THE ENGINE, WAIT FOR ALL MOVING PARTS TO COME TO A COMPLETE STOP,
REMOVE SPARK PLUG WIRES, DISCONNECT THE NEGATIVE BATTERY CABLE, THEN WAIT 5 MINUTES
BEFORE PERFORMING ANY MAINTENANCE PROCEDURE OR INSPECTION ON THE CHIPPER..
Troubleshooting Table (continued)
S
YMPTOM
The machine's wh
he machine's wh
track left or righ
track left or righ
t
t
while being towed.
while being towed.
30.00 COMMERCIAL DR
50
P
C
OSSIBLE
AUSE
⇒ Check the tire pressure. There should be 38 psi in each tire. There
⇒ Check the tire pressure. There should be 38 psi in each tire. There
eels
eels
should be 60 psi in ea
should be 60 psi in ea
®
RAPID-FEED™ CHIPPER
ch tire if you have the road towing option.
ch tire if you have the road towing option.