ON
OFF
Cont.
ROOM
Pilot
°
°
SET
S M T W T F S
USB
PROGRAM
P1
P2
:
AM
P2
P2
PM
A
B
AUX
MODE/SET
Figure 42 - Remote Control Battery
Compartment
TOUCH SCREEN LCD AND BUTTON
LAYOUT
Functional Description
Note: All function adjustments will be auto-
matically accepted 15 - seconds after pressing
a given touch zone or button. The user may
press the MODE/SET button to immediately
accept the adjustment manually.
ON
OFF
Cont.
ROOM
Pilot
°
°
SET
S M T W T F S
USB
PROGRAM
P1
P2
:
AM
P2
P2
PM
A
B
AUX
MODE/SET
MODE/SET
DOWN
Button
Button
Figure 43 - Touch Screen Settings
126718-01A
REMOTE CONTROL OPERATION
BATTERY
COMPARTMENT
BACK
MODE Zone
ROOM TEMP
Zone
SET TEMP Zone
(Unused)
TIME/PROG.
Zone
LIGHT Zone
FLAME Zone
AUX Zone
(Unused)
FAN Zone
(Unused)
UP Button
www.SuperiorFireplaces.US.com
Continued
Day and Time Display
•
The current day of week and time of
day will be continuously displayed in the
TIME/PROG Zone (except during Setup
operations).
•
The day of week will be displayed as
one of the following: S, M, T, W, T, F, S
•
The time of day will be in 12-hour AM,
12-hour PM format. Midnight will be
displayed as 12:00am.
•
Day/Time Setup:
•
Press and hold the MODE Zone
or the MODE/SET Button for 5
seconds to enter Day/Time Setup.
•
Press the UP or DOWN Buttons
to adjust the day of week (press
the MODE/SET Button or wait for
15 seconds for adjustment to be
accepted, then enter hour of day
adjustment).
•
Press the UP or DOWN Buttons to
adjust the hour of the day. The time
will advance in 1-hour increments;
AM and PM will change when the
hour advances to 12:00 midnight
and 12:00 noon respectively (press
the MODE/SET Button or wait for
15 seconds for adjustment to be
accepted, then enter minute of hour
adjustment).
•
Press the UP or DOWN Buttons to
adjust the minute of the hour. The
time will advance in 1-minute incre-
ments (press the MODE/SET But-
ton or wait for 15 seconds and the
transmitter will exit Day/Time Setup
and return to normal operation).
•
LCD Displays – when in Day/Time
Setup:
MODE Zone: Blank
ROOM TEMP Zone: Blank
SET TEMP Zone: Blank
LIGHT Zone: Blank
FAN Zone: Blank
TIME/PROG Zone: Day of Week, or
Time of Day will Flash
AUX Zone: Blank
FLAME Zone: Blank
•
Temperatures may be displayed
in degrees F (factory default) or
degrees C. Press the up and down
buttons simultaneously to change
between degrees F. and C.
31