Superior DRL4543TEN Installation And Operation Instructions Manual page 24

Removing False Door
1. In the rear of the fireplace, remove false
door just as you would remove the front
glass door. Refer to Removing/Replacing
Glass Door, page 22 of this manual for
instruction. Discard false door.
Removing Rear Interior Wall
1. Remove glass door from front of fireplace.
Refer to Removing/Replacing Glass Door,
page 22 of this manual when removing
glass door.
2. Unscrew 4 corner brackets from the fire-
box top (See Figure 31).
3. Remove 2 side walls and then the rear
wall. Discard rear wall.
4. Replace 2 side walls and reinstall the
corner brackets.
5. Reinstall front glass door.
Installing Second Glass Door
1. Install second glass door in the rear of
the fireplace refer to Removing/Replacing
Glass Door, page 22 of this manual.
Installing Access Door Retaining
Brackets
1. Screw access door retaining brackets into
the inner side face using 2 screws on both
the left and right side as shown in Figure
32.
Installing Side Face Filler
1. Screw side face filler into firebox side
baffle using 2 screws on both the left and
right side as shown in Figure 33.
Figure 31 - Removing Rear Interior Wall
for See-Thru Applications
24
FIREPLACE INSTALLATION
Continued
Rear
Panel
Bracket
Side
Panel
www.SuperiorFireplaces.US.com
Retaining
Bracket
Figure 32 - Installing Access Door
Retaining Brackets for See-Thru
Applications
Figure 33 - Installing Side Face Filler for
See-Thru Applications
Installing Access Door
1. Place access door into rectangular open-
ing in front of the glass door with the
slanted side facing forward. The slanted
surface will slide underneath the flange of
the bottom face Insert tabs on side of ac-
cess door into slots on retaining brackets
(See Figure 34, page 25).
126718-01A