Panasonic WJ-NV300K Operating Instructions Manual page 98

About the status display panel
Normal operation
In case of alarm/error (When the associated buttons are displayed)
q
q Status display area
Recorder status indications and their details are shown in the table below. In the event that the recorder
enters several statuses at the same time, these are displayed in their order of priority. If both statuses have
the same priority, the one that occurred last will be displayed.
Status
Live
During playback
In the process of RAID
recovery
Copying
Formatting SD
Formatting HDD
In the alarm state
In the error state
w Alarm buttons
Indicate that an alarm has occurred. Turn red in the alarm state. Clicking the buttons will toggle between
displaying/not displaying buttons such as the alarm log button and the alarm reset button.
<Face matching function>
If the face matching function has been confi gured for use, the following display functions and operations are
available:
No face matching alarm
Face matching alarm is being issued
e Error button
Indicate that an error has occurred. Turn yellow in the error state. Clicking the buttons will toggle between
displaying/not displaying buttons such as the error log button and the error reset button.
w e
w i
Description
Live images are being displayed.
Recorded images are being played.
Currently in the process of RAID recovery.
Data is being copied. Copying progress is displayed in %.
SD memory card is being formatted.
HDD is being automatically formatted.
Indicates an alarm occurrence. Detailed information of the
alarm will be displayed.
Indicates that an error has occurred. A detailed description
of the error content will be displayed.
(When the face matching function is not used:
t e
r
98
y u
Example Priority
6 (Low)
6
5
4
4
3
2
1 (High)
)