Panasonic WJ-NV300K Operating Instructions Manual page 65

[Status]
Displays the statuses of the hard disk drives.
Normal: Hard disk drives that are operating nor-
mally
Playback-only: Hard disk drives for playback use
only (Recording is unavailable.)
Removed: Hard disk drives that are excluded
from operation due to fault
Error: Hard disk drives that have become faulty
during the format process
Blank: No HDD connected
Added: HDD cannot be used until it is formatted/
installed (Displayed only when in the mirroring
mode)
N/A: HDD that is not available with the currently
used HDD operation mode.
[Recorded time range]
Displays the time range of the images recorded on
the hard disk drives.
Note:
• When using in RAID5/RAID6 mode, "Capacity",
"Status" and "Recorded time range" will be dis-
played in the "HDD1" section of each extension
unit. Running time will be displayed for each hard
disk drive respectively.
[Overwrite cycle]
Calculates and indicates the overwriting cycle of the
hard disk drives, based on the past recording per-
formance (the date & time of the oldest recorded
data, the current date & time and the capacity of the
hard disk drive).
Note:
• While overwriting recording is being performed,
the overwriting cycle will be calculated based on
the date & time of the oldest recorded data and
that of the newest recorded data.
• The more often the recording was performed in
the past, the more accurate the calculation of
overwriting cycle will be.
• When the recording conditions are changed or
when data is automatically deleted, the overwrit-
ing cycle will not be indicated accurately.
65