Panasonic WJ-NV300K Operating Instructions Manual page 40

[Referenced recording days]
Calculates and displays the total number of days for
which recording on the hard disk drives is available.
Note:
• The referenced recording days will be calculated
based on the assumption that recording is started
on Monday.
• The HDD consumption for the event recording will
be excluded.
• If a camera manufactured by other than
Panasonic is used, the value of "Referenced
recording days" will not be displayed.
• "*" preceding an item indicates that the item has
been changed on the "Advanced recording setup"
page.
Configure the advanced settings for schedule recording
[Advanced schedule setup]
Up to 2 schedules can be set. Up to 3 of the schedule recording or event recording can be set for each sched-
ule on each of Time table 1 and 2.
Clicking the [Advanced >] button in the "Schedules" field will open the "Advanced schedule setup" page.
■ Days to record
Select the actions to be taken on each day of the
week based on a time table. [●] indicates the
selected state, [b] the unselected state.
Time table1: Recording according to Time table 1.
Time table2: Recording according to Time table 2.
Off: Neither schedule nor event recording will take
place.
■ Event recording
Set the recording duration in the event that an alarm
occurs and the recording duration before an alarm
occurs.
• When configured to perform recording in high res-
olution and high quality, recording may sometimes
not be performed at the specified rate. When
there may be possibility to fail recording at the
specified rate while using only Panasonic cam-
eras, the confirmation window will be displayed.
[Advanced >] button
The "Advanced recording setup" will be displayed.
Each camera can be set up separately for recording.
(☞ Page 42)
[Event recording duration]
Set the recording duration in the event that an alarm
occurs.
2 s/ 5 s/ 10 s/ 20 s/ 30 s/ 1 min/ 2 min/ 3 min/
5 min/ 10 min/ 15 min
Manual: Recording will continue while receiving
an alarm input signal. Recording will be per-
formed for at least 8 seconds.
Ext.: Alarm output will continue until the alarm
action is reset.
Default: 30 s
[Pre-event duration]
Set the recording duration before an alarm occurs.
0 s/ 5 s/ 10 s/ 15 s
Default: 0 s
Note:
• The actual recording time may sometimes be
longer than the duration selected for this setting.
• Pre-event recording is not performed when "0 s"
is selected.
• When images are set to be recorded together with
audio, the audio may not be recorded at the
beginning of the pre-event recording.
• Actual duration for the pre-event recording will
approx. 5 seconds even if "10 s" or "15 s" is
selected for "Pre-event duration" when recording
with high resolution, high quality and high frame
rate.
40