Panasonic WJ-NV300K Operating Instructions Manual page 42

Set up recording for individual cameras [Advanced recording setup]
Set up items such as the image capture size, frame rate and image quality for individual cameras.
Clicking the [Advanced >] button on the [Recording setup] tab will open the advanced setup page.
[Model]
The model number of the connected camera will be
displayed.
(Blank: Camera is not registered)
[Compression]
The compression method selected when registering
camera will be displayed.
[Image capture size]
Select a resolution for images to be recorded.
<When the aspect ratio is 4:3>
QVGA(320x240)/ VGA(640x480)/
SXVGA(1280x960)/ SVGA(800x600)/
QXGA(2048×1536)
<When the aspect ratio is 16:9>
QVGA(320x180)/ HVGAW(640x360)/
HD(1280x720)/ FHD(1920x1080)
Default: VGA(640x480)
Important:
• The available image capture sizes may differ
depending on the model of the camera and the
compression method.
Note:
• When configured to perform recording in high res-
olution and high quality, recording may sometimes
not be performed at the specified rate.
• Depending on the model of the camera, the cam-
era may reboot when the image capture size is
changed. The reboot will be detected as a com-
munication error, but that is not a malfunction.
[Rate] (Frame rate) (☞ Page 39)
Note:
• The 60 ips is available depending on the camera
model and settings of compression and image
capture size.
• The images of "60 ips" can be displayed in one
screen if a monitor compatible with 1920×1080 p/
60 Hz (720×480 p/60 Hz) is used as a main moni-
tor. (The images on the main monitor other than
1-screen and on the sub monitor are displayed in
"30 ips".)
[Quality] (Image quality) (☞ page 39)
[Audio]
Select whether or not to record audio together with
images.
On: Audio will be recorded.
Off: Audio will not be recorded.
Default: Off
[Schedule]
Select a schedule in which the desired recording to
be performed is included.
Schedule 1: Recording will be performed accord-
ing to the settings for schedule 1.
Schedule 2: Recording will be performed accord-
ing to the settings for schedule 2.
Default: Schedule1
[Referenced recording days] (☞ Page 40)
[Back] button
Click the button after completing the settings. The
screen returns to the [Recording setup] tab.
42