Panasonic WJ-NV300K Operating Instructions Manual page 31

Set up pan/tilt-flip [Pan/tilt-flip]
Select the pan/tilt-flip function for each camera and transmit the information to the cameras to change the cam-
era settings.
Clicking the [Setup >] button for "Pan/tilt-flip" on the [Camera setup] tab will display the setup page.
[Pan/tilt-flip]
Select whether or not to activate the pan/tilt-flip func-
tion that can achieve camera controllability equal to
360° endless cameras.
On: The pan/tilt-flip function will work.
Off: The pan/tilt-flip function will not work.
■ Camera Selection
Select the camera to which the setting of the "Pan/
tilt-flip" is to be sent.
Mark the checkbox of the camera to which the setup
information is to be transmitted.
[Transmission] button
Transmit the setting of the "Pan/tilt-flip" to the cam-
era.
Once transmission is completed and the setting has
been applied to the camera, "OK" will be displayed in
the "Results" field.
If the display reads "Authentication error", etc., the
camera connection or the setting may have failed.
[Back] button
Click the button after completing the settings.
The screen returns to the [Camera setup] tab.
31