Panasonic WJ-NV300K Operating Instructions Manual page 28

Set up Max bit rate [Max bit rate (per client)]
Select the bit rate per a client when the compression method of the camera is H.264 for each camera and
transmit the information to the cameras to change the camera settings.
Clicking the [Setup >] button for " Max bit rate (per client) " on the [Camera setup] tab will display the setup
page.
[Max bit rate (per client)]
64 kbps/ 128 kbps/ 256 kbps/ 384 kbps/
512 kbps/ 768 kbps/ 1024 kbps/ 1536 kbps/
2048 kbps/ 3072 kbps/ 4096 kbps/ 6144 kbps/
8192 kbps
■ Camera Selection
Select the camera to which the setting of the "Max bit
rate (per client)" is to be sent.
Mark the checkbox of the camera to which the setup
information is to be transmitted.
[Transmission] button
Transmit the setting of the "Max bit rate (per client)"
to the camera.
Once transmission is completed and the setting has
been applied to the camera, "OK" will be displayed in
the "Results" field.
If the display reads "Authentication error", etc., the
camera connection or the setting may have failed.
[Back] button
Click the button after completing the settings.
The screen returns to the [Camera setup] tab.
Important:
• When the bit rate is changed, the camera image
transmission will temporarily pause. During the
pause, recording will not be performed.
28