Panasonic WJ-NV300K Operating Instructions Manual page 133

Step 4
Click the [Search] button.
This will run a VMD search within the designated
→ →
search range and display a list of results. It is
possible to switch between list pages by clicking
the [Previous]/[Next] buttons.
Note:
• Up to 100 logs are saved in the list. When more
than 100 logs are filed in the search result, ">
100" will be displayed.
• The VMD search function searches the entire
camera image by default. To designate a search
area, click the [Setup] button next to [Detection
area / Mask duration] on the "VMD search setup"
panel. (☞ Page 134)
• It may take some time until the search results are
displayed.
Step 5
Select the line with the desired list, and click the play-
back button on the playback operation panel.
(☞ page 125)
Playback will start from the date & time selected.
→ →
Note:
• Playback can also be started by double-clicking
the desired date & time line.
Step 6
To stop playback and return to live images, click the
stop button on the playback operation panel.
Playback will stop, and live images will be dis-
→ →
played.
Note:
• Playback can also be stopped and live images
can also be displayed by the following operations:
• Clicking the [x] button on the date & time oper-
ation panel (playback display)
• Clicking the [Live] button on the date & time
operation panel (playback display)
• Changing the playback medium
133