Iris (Brightness) Adjustment; Auto Mode - Panasonic WJ-NV300K Operating Instructions Manual

Iris (brightness) adjustment

Adjusts the lens iris of the camera.
Step 1
When displaying the images on a 4-screen, select the
desired cameras.
Step 2
Click the [Detail] button.
The "Camera control [Advanced]" panel will be
→ →
displayed. (☞ Page 112)

Auto mode

Activates the auto mode function of the camera.
Step 1
When displaying the images on a 4-screen, select the
desired cameras.
Step 2
Click the [Detail] button.
The "Camera control [Advanced]" panel will be
→ →
displayed. (☞ Page 112)
Step 3
Click the auto mode button [C] of the camera, and
select one of the following auto modes:
Auto track: The camera will automatically track an
object moving on the screen.
Auto pan: The camera direction will automatically
move (pan) between the start point and end
point set in advance.
Preset sequence: The camera will move (pan) to
the preset positions registered in advance in
order of the preset position number (numerical
order).
Patrol: The camera will trace the manually
recorded panning pattern.
Step 3
Click the [–] or [+] button.
It is possible to reset the set brightness by clicking
the [Reset] button.
Step 4
Click the [Start] button to start the selected auto
mode function.
Click the [Stop] button to turn off the auto mode func-
tion.
Note:
• Refer to the operating instructions of the con-
nected camera for further information about the
auto mode function of the camera.
115