Search And Play Recorded Images Triggered By Motion Detection (Vmd Search) - Panasonic WJ-NV300K Operating Instructions Manual

Step 4
To stop playback and return to live images, click the
stop button on the playback operation panel.
(☞ page 125)
Playback will stop, and live images will be dis-
→ →
played.
Search and play recorded images triggered by motion
detection (VMD search)
Search images recorded with a camera supporting the VMD search function by the date motion was detected
and play them. Click a date & time on the result list to play corresponding recorded images.
Important:
• To perform the motion detection search, it is necessary to configure the settings of the connected cameras
that support the motion detection search function in advance. Refer to the "readme.txt" on the provided
CD-ROM about the supported cameras. Refer to the operating instructions of the camera in use for further
information.
Step 1
Display the images from the camera to search on a
1-screen. (☞ Page 109)
Step 2
Click the [Search] button on the playback operation
panel. (☞ Page 125)
The VMD search panel is displayed.
→ →
Note:
• Playback can also be stopped and live images
can also be displayed by the following operations:
• Clicking the [x] button on the date & time oper-
ation panel (playback display)
• Clicking the [Live] button on the date & time
operation panel (playback display)
• Changing the playback medium
Step 3
Designate the time range to search.
Set the year, month, day and time of the start and
end point by clicking the respective [D]/[C] buttons.
Note:
• It is also possible to set the start point and end
point of the search range by clicking the [Start]/
[End] buttons after selecting the desired time in
the [Playback] box and clicking the desired date
on the calendar.
132