Panasonic WJ-NV300K Operating Instructions Manual page 60

Note:
• Only a user logged in as "Administrator/Manager"
can change the user level settings.
At the default, operations allowed at the user level
are as follows:
Administrator/Manager: Possible to perform all
the operations (Administrators)
Operator: Possible to perform a part of the set-
tings of the recorder and alarm reset (Head of
operators)
Viewer: Possible to monitor or play the images
(Operators)
* Administrators and managers can perform all
operations. The difference between an adminis-
trator and a manager is that an administrator
has priority over a manager; if both perform the
same operation at the same time, that of the
administrator will have priority.
• The screenshot shows the default.
• When a user tries to operate a function that is not
checked (restricted function), the login window
may sometimes be displayed to prompt a user
with the required user level to log in.
Restrictable operations
It is possible to allow or restrict the following operations for each user.
Operation
Camera operation
Camera control
Search and playback
Copy
Alarm reset
Error reset
Setup
Camera image display
* It is recommended to restrict "Setup" to the administrator.
Description
Camera images displayed on the main monitor can be changed.
Camera control such as panning and tilting can be performed.
Recorded images can be played back and searched by VMD search.
Recorded images can be copied to storage media such as an SD memory
card.
An alarm action can be canceled.
An error action can be canceled.
Setup menus can be displayed and the settings can be configured.
The image and audio data of all cameras can be displayed/output. To set
up the display of camera images, click the [Setup >] button. (☞ Set up the
user level for individual cameras)
60