Display The Operation Window - Panasonic WJ-NV300K Operating Instructions Manual

Network disk recorder
Hide thumbs Also See for WJ-NV300K:
Table of Contents

Advertisement

Display the operation window

Boot the PC and operate the recorder using a web browser.
Step 1
Start the web browser.
Step 2
Enter the IP address or URL assigned to the recorder
into the address box, and then press the [Enter] key.
The authentication window will be displayed. The
authentication window will not be displayed when
"Off" is selected for "User authentication" on the
[Basic] tab of "User management" of the setup
menu.
Important:
Refer to a system administrator for further infor-
mation about the set IP address.
Do not attach "0" before the numbers when enter-
ing IP address.
Example:
○: 192.168.0.50
×: 192.168.0.050
If a message is displayed on the information bar,
see page 184.
Note:
When the top page is displayed for the first time,
the install wizard of the ActiveX control required to
display images from the camera will be displayed.
Follow the instructions of the wizard.
The ActiveX control and the viewer software (
page 172) will be installed at the same time.
When any ActiveX control for a Panasonic
recorder other than this product is already
installed, uninstall "WebVideo ActiveX" from
"Uninstall a program" and then install ActiveX
control for this product. (☞ Page 172)
When the installation wizard is displayed each
time displaying other page even though installa-
tion of ActiveX control for this product has been
completed, reboot the PC.
The ActiveX control used on each PC should be
licensed individually. Refer to your dealer for the
software licensing.
Step 3
Enter the user name and password registered in the
recorder, and then click the [Login] button.
The top page will be displayed.
Important:
Refer to a network administrator for the set user
name and password.
Refer to page 61 for how to register users.
The default administrator name and password are
as follows.
Administrator name : ADMIN
Password
To enhance the security, change the administrator
name and password before running the recorder.
Change the password periodically. Refer to page
61 for how to change the password.
Refer to page 184 when a message is displayed
on the information bar or when an unnecessary
status bar or scroll bar is displayed on the win-
dow.
145
: 12345

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wj-nv300k/gWj-nv300g

Table of Contents