Additional Repdial Key Functions - Siemens OpenStage 40 User Manual

Programming sensor keys
Step by Step
Enter Consult?
Enter Pause?
)20
(47
84

Additional repdial key functions

Prerequisite: You have defined a phone number for a
repdial key and are still in the menu
Entering an automatic consultation call
Select and confirm the option shown. "RF" appears in
the display.
j
Add the destination number.
If you press this key during a call, a consultation
call is immediately set up. The first party is placed
on hold, the number of the saved destination is
dialed.
Entering a number with a pause (example)
Select and confirm the option shown. The display
shows: "P".
j
Enter additional numbers.
A pause is three characters long.
Repdial keys with enhanced functions
Some functions are not available via the menu - you
must enter codes to access them. These codes are
configured in the HiPath 4000 system. You can obtain
these codes from your service personnel.
Example: Locking the phone with simultaneous call
forwarding
The codes used here are examples and may dif-
fer from the settings in your system.
Enter the phone locking code.
Activate the code for call forwarding.
j
Enter the destination phone number.
In networked systems, the sequence must end
(
with .
page 82.