Enhanced phone functions
Step by Step
60
Using the Shift key
The sensor key "Push-Pull"
ured by the relevant service personnel) can be used for
the following functions:
•
Consultation (return to waiting call or waiting confer-
ence)
•
Toggle/Connect
•
Acceptance of a second call
•
Acceptance of a group call
Second call
Z
You hear a call waiting tone. Information for the call is
displayed.
T
Press the flashing sensor key "Push-Pull". You pick up
the waiting call. The LED lights up.
Toggle/Connect
[
You are connected with two parties. One party is on
hold. The sensor key "Push-Pull" lights up.
R
Press the sensor key "Push-Pull" to switch to the other
party. The first party is placed on hold.
Consultation
[ j
You call the second party. The second party does not
answer.
S
Press the sensor key "Push-Pull" to return to the waiting
party or conference.
Group call
[
You are connected with a party. A group call is waiting.
Information for the group call is displayed.
T
Press the flashing sensor key "Push-Pull". You pick up
the group call, the first party is placed on hold. The LED
lights up.
page 21 (must be config-