Speaker Call In A Group - Siemens OpenStage 40 User Manual

Enhanced phone functions
Step by Step
n
72
Speaker call to a fixed destination
The system code for "Speaker call-one-way" and the
destination number are programmed on a repdial key
page 84.
S
Press the programmed repdial key. A connection to the
destination loudspeaker is immediately established.

Speaker call in a group

You can also establish a normal connection within a
group or team (with team call = speed dial numbers 0-
9 or 00-99 for team members) via a speaker call. The
speaker call is then initiated by a group telephone.
The "COM group speaker call" function is line-in-
dependent - all phones can call each other via a
speaker call.
Speaker call to a variable destination
^
Lift the handset.
or
n
Press the key and enter speakerphone mode.
j
Enter the system code for "COM group speaker call"
(contact the relevant service personnel if necessary).
or
S
Press the "COM Group" programmed sensor key.
j
Enter the speed dial number for the corresponding
group member.
A connection is immediately established to this destina-
tion station's loudspeaker if
• the station is not busy
• the handset has not been lifted
• "Do not disturb" is not activated
^
The called party accepts the DSS call by lifting the hand-
set.
S
or
If the called party presses the speaker key or the line
key (if configured), the connection is lost.