Dialing with call charge assignment
Step by Step
Voice encryption?
enabled
always enabled
92
Call duration display
Call duration display is configured by the relevant ser-
vice personnel. The display can show either call dura-
tion or call charges. It can also be switched off.
The call duration appears in the first line of the display
on the right as HH:MM:SS and in 24-hour format. It is
shown 10 seconds after the call starts.
The call charge display feature must be requested from
the network operator and configured by the relevant
service personnel.
Privacy/security voice encryption
Please see also the explanations on
Displaying status in idle mode
You can see whether voice encryption is active on your
phone from the display, when the phone is in idle mode.
If "Voice encryption?" does not appear in the idle
menu, the function is not activated.
c
Open the idle menu
Select and confirm the option shown.
or
S
Press the "Sec Status" programmed sensor key.
The status display corresponding to the security mode
is shown.
Your phone is in "Secure Mode"
or
Your phone is in "Cipher Mode"
page 25.
page 12.
page 12.
page 12.