Table of Contents
Advertisement
Ver.1.0 Mar. 2004
2.3
Supplementary information: Log check
• "TX/RX Test" is the function that sends an e-mail to the mail address of the controller
("Email Address" set in "Receive"). The e-mail sent to the controller is received by the
controller during mail check. The log shows the record of transmission and reception of
this e-mail and, if the transmission/reception is normally terminated, the test can be
regarded as being okay.
• The log is a record of ten different transmissions and/or receptions, no. 1 being the latest.
2.3.1
Example of successful test transmission/reception:
2.4
Connection with Printer Management Utility Remote Care
Device Management Server
• When the above settings have been made, call the Center software administrator and
ask him or her to make the initial connection to the set mail address.
Y103290-2
Setting for Printer Management Utility Remote Care
Log showing successful reception
Log showing successful test transmission
Service Manual
Same time
and date
3-3
Advertisement
Table of Contents
