Table of Contents
Advertisement
5.3 Discovery AP
Configure Discovery AP, go to: Access Points >> Discovery.
After AP template configuration is finish, use this function to detect and manage all of the APs in the
network segments. Note that AMG-2102 can only manage APs that are connected to its LAN ports.
Therefore, the AP discovery function is for adding locally connected APs to its management list. The
administrator must know the local IP addresses of the APs he/she wishes to discover. Or the better way
is reset the AP to default setting for discovery.
To discover AP:
AP Type: Choose the type of AP you wish to discover.
Interface: Set to default.
Admin Settings Used to Discover: Choose from Factory Default or Manual, if the AP is
not using the default IP.
Then click the Scan Now button and the APs match the given settings will show in the list below. If one
AMG-2102 Gigabit Access and AP Management Gateway Pro
80
User's Manual
Advertisement
Table of Contents
