LevelOne AMG-2102 User Manual page 167

Gigabit access and ap management gateway pro
Hide thumbs Also See for AMG-2102:
Table of Contents

Advertisement

The description of the above-mentioned table is as follows:
Item
MAC Address
WAN1
IP Address
Subnet Mask
MAC Address
WAN2
IP Address
Subnet Mask
Packets In
Packets Out
Bytes In
Bytes Out
Status
Service Zone -
WINS IP Address
DHCP Server
Default,
Start IP Address
SZ1~SZ8
End IP address
Lease Time
Mode
Service Zone –
MAC Address
Default,
IP Address
SZ1~SZ8
Subnet Mask
AMG-2102 Gigabit Access and AP Management Gateway Pro
Description
The MAC address of the WAN1 port.
The IP address of the WAN1 port.
The Subnet Mask of the WAN1 port.
The MAC address of the WAN2 port.
The IP address of the WAN2 port.
The Subnet Mask of the WAN2 port.
The total accumulated packets in through this WAN port since the
gateway boots up. The delta shows the difference between the
numbers from last time this Interface Status page is visited.
The total accumulated packets out through this WAN port since the
gateway boots up. The delta shows the difference between the
numbers from last time this Interface Status page is visited.
The total accumulated bytes in through this WAN port since the
gateway boots up. The delta shows the difference between the
numbers from last time this Interface Status page is visited.
The total accumulated packets out through this WAN port since the
gateway boots up. The delta shows the difference between the
numbers from last time this Interface Status page is visited.
Enable/disable stands for status of the DHCP server in Default Service
Zone
The WINS server IP on DHCP server. N/A means that it is not
configured.
The start IP address of the DHCP IP range.
The end IP address of the DHCP IP range.
Minutes of the lease time of the IP address.
The operation mode of the default SZ.
The MAC address of the default SZ.
The IP address of the default SZ.
The Subnet Mask of the default SZ.
162
User's Manual

Advertisement

Table of Contents
loading

Table of Contents