Tag Base And Port Base - LevelOne AMG-2102 User Manual

Gigabit access and ap management gateway pro
Hide thumbs Also See for AMG-2102:
Table of Contents

Advertisement

User's Manual
AMG-2102 Gigabit Access and AP Management Gateway Pro

3.5.3 Tag Base and Port Base

Configure Tag Base or Port Base, go to: System >> LAN Port Mapping.
AMG-2102 supports multiple Service Zones in either of the two VLAN modes, Port-Based or
Tag-Based, but not concurrently. In Port-Base mode, each LAN port can only serve traffic from one
Service Zone as each Service Zone is identified by physical LAN ports. In Tag-Based mode, each LAN
port can serve traffic from any Service Zone as each Service Zone is identified by VLAN tags carried
within message frames. By default, the system is in Port-Based mode with Default Service
Zone enabled and all LAN ports are mapped to Default Service Zone. Compare the two figures
below to see the differences.
38

Advertisement

Table of Contents
loading

Table of Contents