Table of Contents
Advertisement
2.3 Hardware Description
2.3.1 Front Panel
WAN1/ WAN2 (SFP): Two combo WAN ports (SFP) are connected to the external network,
1.
such as the ADSL Router from your ISP (Internet Service Provider).
LAN5/ LAN6 (SFP): Client machines connect to AMG-2102 via these LAN ports (SFP).
2.
LED Indicators: There are four kinds of LED, WAN1, WAN2, LAN5, and LAN6, to indicate the
3.
traffic status of the SFP ports.
WAN1/ WAN2: Two WAN ports (10/100/1000 Base-T RJ-45) are connected to the external
4.
network, such as the ADSL Router from your ISP (Internet Service Provider).
5.
LAN1 ~ LAN4: Client machines connect to AMG-2102 via these LAN ports (10/100/1000
Base-T RJ-45).
6.
Console: The system can be configured via a serial console port. The administrator can use
a terminal emulation program such as Microsoft's Hyper Terminal to login to the configuration
console interface to change admin password or monitor system status, etc.
LED Indicators: There are three kinds of LED, Power, Status and Hard-disk, to indicate
7.
different status of the system.
Note:
By default, all LAN ports are set with Port-based Default Service Zone; for Service Zone
configuration, please refer to 3.3 What is Service Zone.
AMG-2102 Gigabit Access and AP Management Gateway Pro
10
User's Manual
Advertisement
Table of Contents
