Gigabit access and ap management gateway / plus (227 pages)
Summary of Contents for LevelOne VOI-8002
Page 1
On-Net or Off-Net calls. You want to increase the number of FXO port but do not want to wreck out the installed VOI-9300. Solution: This guide will teach you how to Integrate 8 FXO ports that VOI-8002 has with the VOI-9300. The end user will make VOIP or PSTN call seamlessly. Topology: VOI-9300 connects to Internet with static IP (in this case, 61.31.189.162)
Page 2
We recommend using a static IP assigned by your ISP or using DDNS. Configure the DHCP server of VOI-9300. Note here we assign 192.168.1.10 for VOI-8002, therefore we start our IP pool from 192.168.1.11 for other client uses. Page 2...
Page 3
Configure the WAN port for VOI-8002. Enter the static IP 192.168.1.10, default gateway is VOI-9300’s LAN IP, 192.168.1.1. Page 3 2008/2/27...
Page 4
A. On-Net Calls (Calls from PSTN to VoIP) On-Net calls for VOI-8002 to VOI-9300 Line Configuration -> Line Setting -> Hotline, please Enable all FXO ports. Page 4 2008/2/27...
Page 5
Please configure the setting as below. Note: “hl1” to “hl8” (as Hotline mode), Min. Max. Strip digits as 3 (remove “hlx”). Prefix 112 (the default auto attendant number of VOI-9300). The destination is VOI-9300 using SIP protocol (sip:192.168.1.1). Page 5 2008/2/27...
Page 6
Do not forget to save the modification. Return to VOI-9300 -> System -> Trust Host, enter the IP address of VOI-8002 and the SIP port 5060. Page 6 2008/2/27...
Page 7
Off-Net Calls (Calls from VoIP to PSTN) Off net calls from VOI-9300 Outgoing calls -> Outgoing calls via FXO, please configure as below. VOI-9300 will automatically select the FXO port that is not busy. Click on the yellow icon to Modify Outgoing Rules via FXO. Page 7 2008/2/27...
Page 8
VOI-9300. Outgoing call -> Outgoing calls via VoIP. Please configure as below. Note the IP address of VOI-8002 is 192.168.1.10:5060 using SIP port 5060. The dial prefix is 9 means when you dial 9, it will be directed to VOI-8002 FXO port.
Page 9
Return to VOI-8002 -> Routing Setup -> VoIP Call In, please configure as below. VOI-8002 will automatically assign VoIP to a non busy FXO port. Page 9 2008/2/27...
Page 10
Press Access Code 8 + PSTN number to use one of the 4 FXO port on VOI-9300 For example, 826272288 to call 2627-2288 by VOI-9300 FXO port. Dial Access Code 9 + PSTN number to use one of the 8 FXO port on VOI-8002 For example, 926272288 to call 2627-2288 by VOI-8002 FXO port.