Table of Contents
Advertisement
11.2 Remote VPN
Configure Remote VPN, go to: Network >> VPN >>Remote VPN.
AMG-2102 support Remote VPN for user login to system from remote area. After the user is login to
system from the outside network of WAN, the user will feel that it is look like login to AMG-2102 under
the service zone locally. They also can be applied Policy and are controlled by system to access the
network.
All settings are look like the settings in Service Zone. It also can setup the SIP WAN Interface,
Authentication Options, Group Permission, Applied Policy and customizable Login Page.
After Remote VPN is enabled, when you browse the home page with the WAN IP, you will get the
Remote VPN login page, input the enabled authentication options username and password, then you
will login success to system.
Caution:
After Remote VPN is enabled, the default home page will be the Remove VPN login page. If you want
to access the WMI of AMG-2102, please input "login.shtml" after the WAN IP. For example, it may be:
"http://10.2.3.4/login.shtnl"
AMG-2102 Gigabit Access and AP Management Gateway Pro
180
User's Manual
Advertisement
Table of Contents
