Table of Contents
Advertisement
User's Manual
AMG-2102 Gigabit Access and AP Management Gateway Pro
Appendix C. Monitoring 3rd Party AP
rd
Configure Monitoring 3
Party AP, go to: Network >> Monitor IP.
rd
If you are using 3
party AP, you can use Monitor IP function to monitor the AP connection status.
Because AMG-2102 can not manage these APs, Monitor IP is a better way to monitor the AP connection
status.
AMG-2102 will send out a packet periodically to monitor the connection status of the IP addresses on
the list. If the monitored IP address does not respond, the system will send an e-mail to notify the
administrator that such destination is not reachable. After entering the necessary information, click
Apply to save the settings.
Click Monitor Now to check the current status of all the monitored IP. The system supports monitoring
on IP addresses listed in the "Monitor IP List".
229
Advertisement
Table of Contents
