Table of Contents
Advertisement
Port-Based: When Port-Based mode is selected; traffic from different virtual Service Zones will
be distinguished by physical LAN ports. Each LAN port can be mapped to one Service Zone in the
form of a many-to-one mapping between ports and Service Zones.
Specify a desired Service Zone for each LAN Port: For each LAN port, select a Service
o
Zone to which the LAN port is to be mapped from the drop-down list box.
By factory default, all LAN ports are mapped to Default Service Zone; therefore, the
administrator can enter the web management interface via any LAN port upon the first
power up of the system. From the drop-down list box, all disabled Service Zones are
gray-out; to activate any desired Service Zone, please configure the desired Service Zone
under the Service Zone tab and enable its Service Zone Status.
Tag-Based: When the Tag-Based mode is selected, traffic from different virtual Service Zones
will be distinguished by VLAN tagging, instead of by physical LAN ports.
Select Tag-Based and then click Apply to activate the Tag-Based VLAN function. When a
restart message screen appears, do NOT restart the system until you have completed the
configuration under the Service Zones tab first.
AMG-2102 Gigabit Access and AP Management Gateway Pro
40
User's Manual
Advertisement
Table of Contents
