Table of Contents
Advertisement
5.1) Choose "Use the following IP address"
and enter the IP address, Subnet mask. If
the DNS Server field is empty, select
"Using
the
following
addresses" and enter the DNS Server
address. Then, click OK.
5.2) Click Advanced to enter the Advanced
TCP/IP Settings window.
5.3) Click on the IP Settings tab and click Add
below the "Default gateways" column
and
the
TCP/IP
window will appear.
5.4) Enter the gateway address of AMG-2102 in
the "Gateway" field, and then click Add.
After back to the IP Settings tab, click OK
to finish the configuration.
AMG-2102 Gigabit Access and AP Management Gateway Pro
DNS
server
Gateway
Address
226
User's Manual
Advertisement
Table of Contents
