Table of Contents
Advertisement
The description of the above-mentioned table is as follows:
Item
Firmware Version
Build
System Name
Homepage Redirect URL
Syslog server- System Log
Syslog server- On-demand Users
Log
Proxy Server
Warning
of
Disconnection
WAN Failover
Load Balancing
SNMP
Retained
Days
User Logs
Receiver
Email
Address (es)
NTP Server
System Time
Time
Idle Time Out
User
Session
Control
Multiple
Login
AMG-2102 Gigabit Access and AP Management Gateway Pro
Description
The present firmware version of AMG-2102
The current build number.
The system name. The default is AMG-2102
The page the users are directed to after initial login success.
The IP address and port number of the external Syslog Server. N/A
means that it is not configured.
The IP address and port number of the external Syslog Server. N/A
means that it is not configured.
Enabled/disabled stands for that the system is currently using the
proxy server or not.
Enabled/Disabled stands for the connection at WAN is normal or
Internet
abnormal (Internet Connection Detection) and all online users
are allowed/disallowed to log in the network.
Enabled/Disabled stands for the function currently being used or
not.
Enabled/Disabled stands for the function currently being used or
not.
Enabled/disabled stands for the current status of the SNMP
management function.
The maximum number of days for the system to retain the users'
information.
The email address to which the traffic history or user's traffic history
information will be sent.
The network time server that the system is set to align.
The system time is shown as the local time.
The minutes allowed for the users to be inactive before their account
expires automatically.
Enabled/disabled stands for the current setting to allow/disallow
multiple logins form the same account.
159
User's Manual
Advertisement
Table of Contents
