If you do not want to provide any internet access right in the rooms, you may change the
state of the rooms to Block. If the user opens a browser and tries to access internet, it will
pop up a Blocking message to notice the user.
Now, let us begin to configure the Port Mapping. There are three main group of setting: Create
Batch, Change All Room State and Create One.
You can create the Room Mapping by a batch processing that if you want to create a contiguously
VLAN Tag and Room number.
Port Location Mapping Setup – Create Batch
Default Room State: The default state of the rooms, it may be: Charge, Free or Block.
AMG-2102 Gigabit Access and AP Management Gateway Pro
242
User's Manual