Table of Contents
Advertisement
Authentication Option Configuration
Click on the server name to set the configuration for that particular server. After completing and
clicking Apply to save the settings, go back to the previous page to select a server to be the default
server and enable or disable any server in each service zone. Users can log into the default server
without the postfix to allow faster login process.
Server 1~4: There are 5 authentication methods, Local User, POP3, RADIUS, LDAP and NT
Domain, to select from.
Name: Set a name for the authentication option by using numbers (0~9), alphabets (a~z or A
~Z), dash (-), underline (_), space and dot (.) only. The length of this field is up to 40 characters.
This name is used for the administrator to identify the authentication options easily such as
HQ-RADIUS.
Postfix: A postfix is used to inform the system which authentication option to be used for
authenticating an account (e.g. bob@BostonLdap or tim@TaipeiRadius) when multiple options
are concurrently in use. One of authentication option can be assigned as default. For
authentication assigned as default, the postfix can be omitted. For example, if "BostonLdap" is
the postfix of the default option, Bob can login as "bob" without having to type in
"bob@BostonLdap". Set a postfix that is easy to distinguish (e.g. Local) and the server numbers
(0~9), alphabets (a~z or A~Z), dash (-), underline (_) and dot (.) within a maximum of 40
characters. All other characters are not allowed.
Black List: There are multiple sets of black lists provided by the system. A user account listed
in the black list is not allowed to log into the system, the client's access will be denied. The
administrator may select one (or None) black list from the drop-down menu and this black list
will be applied to this specific authentication option.
Authentication Database: Click Configure button to enter the configuration page. For
example, select Local from the drop-down list box and then click Configure button to enter the
Local User Database Settings. Then, click the hyperlink of Local User List.
Group: Select one Group from the drop-down list box for this specific authentication option.
AMG-2102 Gigabit Access and AP Management Gateway Pro
43
User's Manual
Advertisement
Table of Contents
