Table of Contents
Advertisement
4.3.2. AP Discovery
Use this function to detect and manage all of the APs in the network segments.
To discover AP manually, please fill in the required data.
Interface: Check Private LAN or/and LAN1~4 and enter the Base IP and Pool Size (the discovered APs
will be configured to use IP address among the pool).
AP Access: Input the IP Address Range (the default is 192.168.2.1/192.168.2.1), ID (the default is
admin) and Password (the default is 1234) of the AP.
Then click the Discover button and the APs match the given settings will show in the list below. If the IP address
you set is used, there will be a warning message showing up, please change the IP range on Base IP or Pool
Size and then click Discover again. For the desired AP, input the desired Name and password, if changed for
AP admin, select one template, check it and then click Add to add it under the managed list. (About the template,
please see 4.3.4 Template Settings).
95
Advertisement
Table of Contents
