4.2.2 Permission in Service Zone
Configure Permission in Service Zone, go to: Users >> Group.
A Group can be allowed to access one Service Zone or multiple Service Zones. Moreover, a Group can
be applied different Policies within different Service Zones. Remote VPN is considered as a zone, where
clients log into the system via remote VPN.
Zone Name: The name of Service Zones and Remote VPN.
Enabled: Select Enabled to allow clients of this Group to log into the selected Service Zones.
For example, the above figure shows that users in Group 1 can access network services via
every Service Zone as well as Remote VPN under constraints of Policy 1.
Policy: Select a Policy that the Group will be applied with when accessing respective Service
Zones.
To Group Permission Configuration: The relation between Group and Service Zone is
many to many; every Group can access network services via more than one Service Zone,
and meanwhile, each Service Zone can serve more than one Group.
AMG-2102 Gigabit Access and AP Management Gateway Pro
68
User's Manual