LevelOne AMG-2102 User Manual page 105

Select Policy: Select Global to set the Firewall Profile, Specific Route Profile and Maximum
Concurrent Session.
Firewall Profile: Global policy and each policy have a firewall service list and a set of firewall
profile which is composed of firewall rules.
Specific Route Profile: The default gateway of WAN1, WAN2, or a desired IP address can be
defined in a policy. When Specific Default Route is enabled, all clients applied this policy will access
the Internet through this gateway settings, include default gateway.
Maximum Concurrent Sessions: Set the maximum concurrent sessions for each client.
Policy
Beside Global Policy, there have Policy 1 to Policy X, each Policy consists of access control profiles
that can be configured respectively and applied to a certain Group of users. The clients belonging to a
Service Zone will also be bound by an applied Policy. In addition, a Policy can be applied at a Group basis;
a Group of users can be bound by a Policy. The same Group can be applied with different Policies within
different Service Zones.
Select Policy: Select Policy 1~Policy X to set the Firewall Profile, Specific Route Profile,
Schedule Profile and Maximum Concurrent Sessions.
Firewall Profile: Each Policy has a firewall service list and a set of firewall profile consisting of
firewall rules.
Specific Route Profile: The default gateway of WAN1, WAN2, or a desired IP address can be
defined in a policy. When Specific Default Route is enabled, all clients applied this policy will access
the Internet through this gateway settings, include default gateway.
Schedule Profile: The Schedule table in a 7X24 format is used to control the clients' login time.
When Schedule is enabled, clients applied policies are only allowed to login the system at the time
which is checked in the applied policy.
Maximum Concurrent Sessions: Set the maximum concurrent sessions for each client.
AMG-2102 Gigabit Access and AP Management Gateway Pro
100
User's Manual